Solar Powered Car Base DIY Solar Power Non-Assembled Model Build Project Toy Learning Kit

• 1 Kit.
• Solar Powered Car Base DIY Solar Power Non-Assembled Model Build Project.
• DIY construction. 
  
• Dimensions: 80x65x30mm.
• Note: you will need a small cross head (e.g. Phillips head) screwdriver in order to screw in the tiny bolts. 
  

Construction steps

• Note: the below construction is done without the use of a soldering iron in order to connect the motor wires to the solar panel wires. To use a soldering iron to connect the wires, in particular utilising the including heat shrink, is a more permanent solution. Here is a link to a video containing extra build notes and showing operation under torch light and sunlight... https://youtu.be/TNs6V8fnGB0